Pellet Mill

Home > News >

MODEL	LCHM350×100
Feeder motor power	0.75KW
Conditioner motor power	3KW
Main motor power	30KW×2
Output (t/h)	3.5-5
Hollow spindle rotate speed	335RPM
Ring die spec.(mm)	Inner ring die diameter×width=Φ350×100
Dimension (mm)	L×W×H=2122×1649×1718
Total weight(kg)	About 2220

1. Pellet Mill Feeder
Feed port and discharge port of feeder configuration centre distance is 491mm, which acollates reduction gears. You can also lengtening the centre distance to 500mm according to client requirement or acollate reduction gears of variable frequency motor.

2. Conditioner
Conditioner is without steam jacket,the centre distance of feed port and discharge port is 1656mm. You can also lengtening the centre distance to 500mm according to client requirement. You can acollate with steam jacket.
Conditioner shall acollate steam system, steam pipes configurate by the user or engineering. When operate, the machine should through steam which produced by steam boilers.The steam pressure is ≥0.7Mpa, through the pipe system into the conditioner pressure is 0.1-0.4Mpa.

COMMENTS

“ From the moment that contacted them, they were always worried about me. Helping you find the model that fit my needs, during the shipping process and excellent after-sales service. Without doubt a company which would buy again.”

Charles Avery

AUS

“I am very satisfied with the product. Both the material and the manufacturing is of great quality. It exceeded my expectations. At first he was afraid for purchasing the product from a distant place, but once I had it in my hands I knew I had made the correct decision.”

Kelly Kulp

USA

Quality Guaranteed