Shredders And Crushers
The FSJ-II Hammer Mill is suitable for processing raw materials like tree branches, cotton stalks, corn stalks, straw, etc. less than 50 mm in diameter. The hammer mill then reduces these materials to between 3 and 5 mm in diameter, an appropriate size for further pelletization.
The FSJ-I Wood Crusher is suitable for crushing raw wood less than 200 mm in diameter. The crusher is able to cut larger raw materials down to the needed size for pelletization of between 3 to 5 mm.
|
|
|
|
Model |
FSJ-I Crusher |
FSJ-II Hammer mill |
|
(For wood) |
(For branches, stalks, etc.) |
|
|
Capacity |
700 kg/h |
900 kg/h |
|
Feed diameter |
≤ø200 mm |
≤ø50 mm |
|
Diameter of output |
Ø3 mm |
Ø3 mm |
|
Motor |
11 kW |
18.5 kW |
|
Weight |
400 kg |
650 kg |
|
Overall dimensions (mm) |
1250*700*910 |
1700*1150*1200+ |
The TFS Series Hammer Mill can process biomass materials less than 40 mm in diameter.
|
|
|
|
Type |
Power |
Capacity |
Dimensions (mm) |
|
TFS420 Hammer Mill |
7.5 kW |
900 |
1090×820×1100 |
|
TFS420 Hammer Mill |
11 kW |
1100 |
1090×820×1100 |
|
TFS420A Hammer Mill |
15 hp diesel engine |
1200 |
1090×820×1100 |
|
TFS420A Hammer Mill |
22 hp diesel engine |
1400 |
1090×820×1100 |
|
TFS500 |
22 kW |
1300 |
1090×820×1100 |
|
TFS500A |
55 hp diesel engine |
1600 |
1090×820×1100 |
New product for you
Recently we have improved the hammer mill, adding another cyclone separator.Before, every time after packaging, there was raw material leakage when replacing bags, now there is a handle in the middle of the cyclone through which the baiting order of the two cylinders can be adjusted so as to effectively prevent the residual material from leaking.
