Biomass Briquette Press
Crushing Machines
For proper working of biomass briquette press and drying machine in the biomass briquetting plant,size of biomass waste is important. There are two types of crushing machine available for make suitable size sawdust or biomass grain for following drying machine and biomass briquette press in biomass briquetting plant. The choose of proper model depend on the types and size of your raw material.
(1) FSJI Wood Crusher
In the biomass briquetting plant, FSJI Wood Crusher/ pulverizer is suitable for preparing sawdust or biomass small grains for briquette press and dryer. It can crush raw wood of size less than 200mm(diameter) into size of 3-5mm(diameter).
Video:Hammer Mill with Tree Branch
Model |
FSJ I Wood Crusher(For fresh or dried raw wood) |
|
Capacity(kg/h) |
400-500 |
|
Diameter of Feeding Material |
Not more than 150-200mm |
|
Size of crushed material |
Max. Ø5×5mm |
|
Motor |
11kw |
|
Gross/Net Weight |
400/350kg |
|
Overall Dimension (mm) |
1250*700 *910 |
(2) FSJII Hammermill
In the biomass briquetting plant, FSJII Hammermill is suitable for preparing suitable size raw material for briquette press and dryer. It can mill raw material like tree branch, tree trimmings,wood chips, wood cuttings, cotton stalk, corn stalk, wheat straw etc) of size max. 50mm(diameter). After milled, the output size can reach diameter 3-5mm , that is good for working of following dryer and briquette press.
Model |
FSJ II Hammermill(for wood chip/tree trimmings/wheat straw/plant stalk etc) |
|
Capacity(kg/h) |
500-700 |
|
Size of Feeding Material |
Max. diameter 50mm |
|
Size of milled material |
Ø5×5mm |
|
Motor |
18.5kw |
|
Gross/Net Weight |
550/650kg |
|
Overall Dimension (mm) |
1700*1150*1200 |
|
Cyclone (2400*800*800) |
